Can anyone help - Needed to change some microswitchess in taps to remedy no water supply. Fantastic that we now have a plentiful water suuply, BUT have new problem that the Water pump will not stop running. Tried re-purging the system, to no avail - wonder if we have some air on board? Would be grateful for any other suggestions!
whale water pump - won't stop running
- Thread starter dave_374364817
- Start date
Damian
Moderator
Probably wired one of the microswithes wrongly, giving a constant signal to the pump for water, as you say "Needed to change some microswitchess", how many , how many taps?? what type of taps?
Initially changed microswitch in Elite mixer tap in kitchen,which remedied supply prob, but still did not have any hot water supply via Elegance bathroom tap - once that switch changed, supply from all 3 taps!
Could it be the wires in wrong places, despite taps functioning now - this task is new to me, so any advice would be good
Could it be the wires in wrong places, despite taps functioning now - this task is new to me, so any advice would be good
Damian
Moderator
Dave, with them being Elite and Elegance it is almost certain that you have wrongly wired one or the other as they share common positive and return wires, that is one wire will supply the positive and has two spade terminal connections on it, as does the return.
One pos terminal connection goes to each of the taps as does one return connection.
I am guessing that you have put two of the same wires on one tap.
One pos terminal connection goes to each of the taps as does one return connection.
I am guessing that you have put two of the same wires on one tap.
Thanks for the tip - that will be my homework for tomorrow night! Will let you know how I get on - Cheers
Facebook
Twitter