Toggle sidebar Toggle sidebar
S

Shaino

Messages
53
Featured content
0
Reaction score
27
Points
85
Joined
Last seen

Latest activity Postings Featured content About

    • S
      Shaino replied to the thread DIY project codename DOS/4GW.
      Outside work
    • S
      Shaino replied to the thread DIY project codename DOS/4GW.
      Yeah the upholstery was a tough task as we bought the fabric only. Not only it required a well measured sewing process but also all...
    • S
      Shaino replied to the thread DIY project codename DOS/4GW.
      This is the current state of the project, inside. We are pausing for now as it is too cold for work
    • S
      Shaino replied to the thread Treat old rotted wood.
      1. Thanks everyone, I cleaned the area around to assess the damage. The damp readings are 19 around and 29 in it. 2. The O/S rear...
      • photo_2023-10-27 11.56.05.jpeg
      • photo_2023-10-27 11.56.09.jpeg
      • photo_2023-10-27 11.56.13.jpeg
    • S
      Shaino replied to the thread DIY project codename DOS/4GW.
      So fixing the kinked heating pipe isn't a big issue. I even could reuse one of the current rubber joined, if anyone needs the second one...
      • photo_2023-10-26 10.02.26.jpeg
      • photo_2023-10-26 10.01.02.jpeg
      • photo_2023-10-26 10.00.02.jpeg
      • 2023-10-26 09.59.31.jpg
    • S
      Shaino replied to the thread Treat old rotted wood.
      No signs of leaks everywhere. It could have been somewhere and fixed later, given the age of the van 18 can't tell for sure. I can cut...
    • S
      Shaino replied to the thread DIY project codename DOS/4GW.
      Regarding the last picture got the official response from Alde: Well.... Thank you Swift Group for the build quality. I've got...
    • S
      Shaino posted the thread Treat old rotted wood in Technical.
      Finally found a potential damp issue - found it in the back corner. There was a huge sticky stain under the bed, I reckon it was a...
      • photo_2023-10-22 22.25.57.jpeg
    • S
      Shaino replied to the thread DIY project codename DOS/4GW.
      A few interesting engineering approaches I can't explain: 1. No time to find a proper cap with 3 holes? 2. 12v cable is stuck forever...
      • photo_2023-10-22 21.54.57.jpeg
      • photo_2023-10-22 21.54.52.jpeg
      • photo_2023-10-22 21.54.48.jpeg
      • photo_2023-10-22 21.54.43.jpeg
      • photo_2023-10-22 21.54.38.jpeg
      • photo_2023-10-22 21.54.33.jpeg
    • S
      Shaino replied to the thread Rusty bolts.
      It's something like this, but in my case it's 1 bar across the whole rear, on 3x2 bolts
      • Screenshot 2023-10-14 at 21.22.51.png
    • S
      Shaino replied to the thread Rusty bolts.
      They are to hold a decorative external bar at the rear of the caravan
      • photo_2023-10-14 21.17.26.jpeg
    • S
      Shaino posted the thread Rusty bolts in Technical.
      Hi All, Discovered today that 2 of 6 internal bolts/nuts that hold external rear bar are rusty. The bar is attached securely, doesn't...
      • photo_2023-10-14 20.55.45.jpeg
    • S
      Shaino replied to the thread DIY project codename DOS/4GW.
      The mesh on the last 2 photos I installed myself, the one on the first two runs at the bottom:
      • photo_2023-10-01 16.12.07.jpeg
    • S
      Shaino replied to the thread DIY project codename DOS/4GW.
      There are many small upgrades happening during the process. I'm not a blogger so unfortunately won't be able to capture all of them in...
      • 2023-10-01 14.11.35.jpg
      • 2023-10-01 14.11.25.jpg
      • photo_2023-10-01 14.29.57.jpeg
      • photo_2023-10-01 14.30.02.jpeg
    • S
      Shaino replied to the thread DIY project codename DOS/4GW.
      Boiler is in the other caravan part (to the right). I don't think I'll be removing it - too many connections and need to drain the...
    Show older items
  • Loading...
  • Loading...
  • Loading...

TRENDING THREADS

Latest posts

COMPANY
RESOURCES
FOLLOW
Top Bottom