12s socket for Damian

[Catsparkey]

Damian I've followed your instructions to the letter regarding changing over the two sockets to the thirteen pin socket and appear to have two leads over namely a brown and a blue from the 12s socket. They were both screwed in the 12s 'somewhere' but I'm in panic mode now as Ididn't note where they came from. I was aware that there would only be five used but where do I put the two spares?

Gordon

 

[Dennis_374427501]

Gordon. Put the Blue from terminal 2 12S Socket to Terminal 12 of 13Pin Socket.The Brown came from terminal 5 12S is not used.Just tape it up.All should work ok.Good Luck.

 

[Damian]

You have the choice of as has been said, put one wire to the pin 12, even though it is not used.

Or cut both brown and blue off as they are not needed.

 

[Catsparkey]

Damian & Dennis You are both stars thanks Gordon.