2013 elddis whale IC System

[Bullet1747]

Morning I’m new on here, but been caravanning for many years, I’ve just recently bought an elddis affinity

Decided yesterday to prep for a tour round Scotland and had to put it back

Went to run the water and nothing, the system has the whale IC system now I’m a very handy person but this has me stumped, switch the tap on nothing first off all the fuse had blown, changed this call light lights up no water still, pump does work just not when called for even bought a new one 🤬

Take the yellow module off the back of the inlet power is there couple the poz neg up pump runs, question is before I buy new module is there anything I’m missing
Any advise would be grateful, I’m calling whale tomorrow but would love to able to go Scotland tomorrow as well

 

[GUMPY]

The "intelligent" pressure switch ( yellow module) has a habit of failing. Mine went on site as I was setting up. If you can find the parts it's just a question of removing the yellow module and fitting the adjustment screw and lock ring. Then setting it as in the picture enclosed.
I ended up swapping the whole inlet as I couldn't get the parts easily.

 

[Bullet1747]

The "intelligent" pressure switch ( yellow module) has a habit of failing. Mine went on site as I was setting up. If you can find the parts it's just a question of removing the yellow module and fitting the adjustment screw and lock ring. Then setting it as in the picture enclosed.
I ended up swapping the whole inlet as I couldn't get the parts easily.

Thanks for that
Took it to bits and it had shorted out