- Sep 23, 2019
- 7
- 0
- 510
Hi,
We have a 2006 502DK with the large Front Window.
We had a problem in the summer where the top lip (like a plastic 'C' section) came away 7 caused the window to drop out (as I opened it)
I followed a repair procedure & using a specialist glue re bonded it,but just noticed we have a leak coming in the O/S/F top corner.
So I'm after advise on how to cure this...tighten the black locking handles (looks like adjusting screws)
Use a sealant (I am aware & prepared never to open it again)
Its a Plastoform window.
Thinking about it , i need the top lip sorted as thats where the water is getting in (not pulled tight)
Thanks for any advice
Ian
We have a 2006 502DK with the large Front Window.
We had a problem in the summer where the top lip (like a plastic 'C' section) came away 7 caused the window to drop out (as I opened it)
I followed a repair procedure & using a specialist glue re bonded it,but just noticed we have a leak coming in the O/S/F top corner.
So I'm after advise on how to cure this...tighten the black locking handles (looks like adjusting screws)
Use a sealant (I am aware & prepared never to open it again)
Its a Plastoform window.
Thinking about it , i need the top lip sorted as thats where the water is getting in (not pulled tight)
Thanks for any advice
Ian