Bailey Unicirn Cartegena 3 Drawers

[PaulT]

Could someone, please, tell me how to remove the drawers in the front, central, unit? I thought they must be of the lift up and pull variety but they are not. I can't find any release pins or similar. Am I missing something obvious?

 

[Dustydog]

If they are like the usual Bailey. Lie on your back and look up at the runners. Midway or so you will see a plastic moulding on each side. Gently move each piece away from the metal runner as you push the drawer upwards. Bingo. You may need to us some gentle leverage with a screw driver. Easy.

 

[Hutch]

If they are like the usual Bailey. Lie on your back and look up at the runners. Midway or so you will see a plastic moulding on each side. Gently move each piece away from the metal runner as you push the drawer upwards. Bingo. You may need to us some gentle leverage with a screw driver. Easy.

Or look inside the drawer for a small screw on each side, remove these, and then the drawer should pull out.

 

[Beehpee]

I’ve had to remove the draws on probably hundreds of occasions and with draw empty and fully open a sharp tug upwards on the draw handle has been sufficient every single time to release it.

BP

 

[Mel]

I’ve had to remove the draws on probably hundreds of occasions

BP

Why? Don't think we've had to remove the drawers once. Are we missing out on some drawer related activity? :cheer: :cheer: :lol: :lol:
Mel

 

[Hutch]

I’ve had to remove the draws on probably hundreds of occasions

BP

Why? Don't think we've had to remove the drawers once. Are we missing out on some drawer related activity? :cheer: :cheer: :lol: :lol:
Mel

Mel you obviously don't have drawer Sprites, they steal pencils, erasers, and magazines, and hide them behind drawers.

 

[Hutch]

Ref the Pencil Sprite, does anyone own a pencil shorter than 4 inches short. ?

 

[PaulT]

Ok, on to the next question. The reason I wanted to get the drawer out was because the pull out table flap thing would only come out about half way. I assumed that there was something stuck in the mechanism. But there isn't. Can someone tell me how to remove the flap - it seems to be fairly well secured.