Bath room sink plug

[Nimrod]

I know this sounds silly but ive got an Elddis Xplore 304 caravan, and the bathroom sink plunger you use to drain the water away, The washer has disintegrated and need to be replace but I can’t seem to get one any where, I put an O ring washer as a temp one But that doesn’t seen to work, thanks,

 

[Damian]

By sink plunger , do you mean a click type where you push it down to close the sink and press it again and it pops up to release the water? like the domestic ones?

 

[Nimrod]

By sink plunger , do you mean a click type where you push it down to close the sink and press it again and it pops up to release the water? like the domestic ones?

Yea thats the one

 

[Damian]

Unfortunately there does not seem to be any spare parts for these types of waste , and they have a bad habit of sticking , either in the Up or Down position.

You will probably have to replace the whole fitting.

 

[Nimrod]

Unfortunately there does not seem to be any spare parts for these types of waste , and they have a bad habit of sticking , either in the Up or Down position.

You will probably have to replace the whole fitting.

Ok thx damian

 

[Damian]

I dont know what dimensions your current item is but if this fits it is very good (I have them at home after suffering sticking click wastes)

Diall Chrome effect Brass Rotatable valve Slotted Waste (Dia)32mm

This brass chrome effect rotating basin waste slotted from Diall is Suitable for sinks, and comes with a plug.

www.diy.com

They also do an unslotted version if you dont have a sink overflow.

 

[Jcloughie]

I know this sounds silly but ive got an Elddis Xplore 304 caravan, and the bathroom sink plunger you use to drain the water away, The washer has disintegrated and need to be replace but I can’t seem to get one any where, I put an O ring washer as a temp one But that doesn’t seen to work, thanks,

An ‘O’ ring sounds right to me, perhaps you just need the right size. You may stand a chance with these.


John

 

[Nimrod]

An ‘O’ ring sounds right to me, perhaps you just need the right size. You may stand a chance with these.


John

O rings don’t work as the original washer is shaped

 

[Jcloughie]

O rings don’t work as the original washer is shaped

Is it dished? Perhaps look around DIY places at domestic wastes and see if one of them is a match. That way you will have a bigger choice of manufacturers.

John

 

[otherclive]

Try this web site. I’ve found them very useful for sourcing obscure stuff. They have a sinks and drains section on the menu.

Fixthebog