• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Bed slats sticking!

T

Turps

Hi- wondering if anyone can help. Been away in our inherited coachman amara 520/4 and had trouble with the front bed slats. When I pull them out they jam and I end up having to limbo underneath and reach into the cupboard to lift the last couple of slats through the slot- they seem to tilt so don’t come through properly. Any solutions?? Getting friction burns from wiggling underneath :silly: Thanks !!
 
The tapes that hold the string of slats together is usually held to each slat by 2 or 3 staples underneath. If any of these have come out or loose the slat may not pull through evenly so more grazed arms squeezing to untangle them!
 
I find with mine that rather than pushing the slats together from the far end, and then pushing them in in one go, it is best to feed each slat slowly in separately taking care to push the slat in squarely from both sides. It also helps if the webbing is pushed downwards, rather than randomly on either side. After the first few slats, if I hear them 'drop' I know the rest will usually go in easily. This technique works 4 times out of five; if not I pull out and start again..

EDIT, just realised that you are having problems pulling the slats out ..... not pushing them back in!
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top