Bradcot Classic 960 size easy alloy poles question

[PaulHovell]

Hi Just got a 'set' of Easy alloy poles off ebay for a what I think is a really low price ( hundreds of pounds less than new ) . However, Im not sure if its missing a couple of bits. I have two support poles for the roof but no extra 'leg' support poles ( my old steel frame has both) . Should the easy alloy system have these extra leg support poles for a awning of this size???

Also any other pay of attaching the support poles other than 'clamp' brackets. I found these cut a ole in the fabric with the steel poles

Any help gratefully received !!

 

[Damian]

Paul, yes there should be two extra legs and no, there is no other way of fixing them apart from the clamps.

 

[TLC]

Hi Paul,

I have got a 960 Classic with easy up poles & I do have 2 extra leg supports that sit in between the 3 main poles at the front.

We have also found the clamps no problem at all.

Hope this helps?

 

[albert3]

Hi Paul

We have have a bradcote 950, I think ,it consists of two end sections with leg, end roof support and a connection for the front roof support, there is also a centre secion with a leg a roof support and two front roof supports, there is then two mid legs which fit between the centre and end legs with screw tighten clamps and finally, two roof supports with hook and screw tighten clamps, these roof support fit in the same place as the legs. If you are short of any parts or have any parts damaged then A1 Awnings of Cardiff are the official stockists(I was given their address by Bradcote, www,a1awnings.co.uk) and carry most parts in stock.

Hope this helps

 

[PaulHovell]

All many thanks for your feedback, and the contacts for spares