Caravan movers and wheel clamps

[Peter_5068900]

Hi to all

I am thinking about having a mover fitted to our 2004 Ace Jubilee Globetrotter. Has anyone had any problems with fitting a wheel clamp when the mover is installed? I have a Bulldog Titan wheel clamp.

Any help/advice appreciated.

Thanks.

Peter

 

[Mike_5041144]

Hi Peter

I have a Truma [Carver] mover - in front of the van wheels. The drive rollers are at about 9 or 10 o clock. My Milenko wheel clamp is well clear and no problem.

Mike

 

[VIP2006]

I have found that if you enter the top piece of the clamp at the opposite side to where the mover is fitted it goes on OK. forget tryig to get around the mover side.

Alternatively you can fit the SAS one which fits into one of the wheel nut openings and does not interfere with mover.

I use the over the wheel type when in storage and the other when pitched on a campsite.

 

[Maz_5041035]

We have a Powertouch mover & use a Euroclamp device without any problems.

 

[Peter_5068900]

Thanks for your replys. It seems that there are no problems. I think we will go ahead with a powrtouch mover.

Peter

 

[Lord Braykewynde]

I have a Truma/Carver mover with a Bulldog clamp. No problems, just do as Shiraz said.