cascade 2 water heater

Apr 9, 2015
1
0
0
:sick: hi every one. hoping some one can help. my cascade water heater when i turn 12 volt pump on all the water leaks out of my water heater ignition plate on the side of my van. any one any ideas
 
Feb 3, 2008
3,790
0
0
There is a drain plug there, perhaps it was opened to drain for the winter or service and not screwed up again. Or the O ring has split.
 

Damian

Moderator
Mar 14, 2005
7,510
936
30,935
Apart from the drain plug on the bottom right of the outside of the heater, there is a pressure relief valve at the top left of the heater which may have been left in the open position, or the O ring has failed , or the valve has broken and needs replacing.
Other than that there is also a fusible plug in the centre of heater under the outside cover plate.

Take the outside cover plate off ( Phillips screwdriver, 4 screws) and see where the water is coming from.
 

TRENDING THREADS