I have done a front end build from the inside on both the corniche and a fleetwood garland,non are too difficult if you just take your time and you have a bit of knowledge of DIY and can use a saw,Hammer and a screw driver and maybe a staple gun,although i must say i never used staples at all it was always screws and brackets,it will take you around 30 to 40 hours or maybe longer,I started both around september and they where ready to use by the following easter,mind you it wasnt every weekend just every now and again,good winter project,(dont know what im going to do this winter though,good luck,
Facebook
Twitter