Electrical connect atc 2 to swift

[kgkeates]

I am going to fit atc 2 from alko to a 2020 swift eccals x850. Believe the electrical connection is available on Sargent c44 fuse board with connection FB5 this is a connection for some type of 2 pin push on connector. The wireing on the alko is 3 spade connectors live feed live return and an earth. Does anyone know how to connect this up please

 

[Dustydog]

I am going to fit atc 2 from alko to a 2020 swift eccals x850. Believe the electrical connection is available on Sargent c44 fuse board with connection FB5 this is a connection for some type of 2 pin push on connector. The wireing on the alko is 3 spade connectors live feed live return and an earth. Does anyone know how to connect this up please

That’s unusual?
Normally the Al-ko ATC is wired via the tow bar electrics , totally independent of the caravan system.
, My ATC receives its power from the 13-pin plug on the towing vehicle, specifically through a pin 9, which corresponds to pin 4 on the 12S (older 7-pin) socket.
It is a live feed without the car ignition being turned on.

 

[kgkeates]

That’s unusual?
Normally the Al-ko ATC is wired via the tow bar electrics , totally independent of the caravan system.
, My ATC receives its power from the 13-pin plug on the towing vehicle, specifically through a pin 9, which corresponds to pin 4 on the 12S (older 7-pin) socket.
It is a live feed without the car ignition being turned on.

Hi the tow bar electrics connect to the c44 fuse board directly with a plug that connects to the board and on this board is the FB5 socket