• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

fixing to caravan walls

I want to fit a 1kg fire extinguisher to the wall of my 'van. Can anyone suggest the best fixing method? Is the innner lamination strong enough to allow the use of household cavity fixings or is there a specific 'caravan' type fixing available? Any info/experience welcomed. Ta
 
If you were to place the fire extinguisher so that it is resting on the floor, and then retain by attachment to the wall, then a normal lightweight fastening will probably suffice. However, most inner walls are made of plywood, or laminated board and will not support much in the way of fixing something like a fire extinguisher unless you can find one of the supporting battens and fix to that.

Is it not possible to attach it to a bunk end or furniture end, where the wood material is much thicker?

The other comment is what are really expecting a 1 kg extinguisher to actually do? It is pretty small. Most fires in a van will,involve the cooker hob and a fire blanket is possibly a better option. The other 'golden rule' is in the event of a fire, get the Hell outside and watch it burn. You have insurance and dead heroes are no use to anyone.
 
I always stock up on them when in France as they are readily available in Hypermarkets

They call them chevilles or something similar

They used to be cheap but who knows how much cheaper now that the Euro exchange rate is poor!!
 
Seconded !

I have used Bond Tight for exactly the same weight extinguisher (however the base is resting on the van floor) - works a treat.

Jon
 
I fixed the same size extinguisher high up on the wall near the door my Bailey caravan in 2003 and it is still in position having towed several thousand miles back and forth across Europe.

Method - mark the positions of the holes carefully. Drill small pilot holes and then use self tapping screws and cover the shank of the screws with plenty of "no more nails". Drive screws home and leave to set, job done. Hope this helps.
 

TRENDING THREADS

Latest posts

Back
Top