Flashing alarm recepticle

May 26, 2024
9
1
15
Visit site
Hello,

My alarm reset keeps flashing when the alarm is off. I've changed the batteries, reset the alarm and thought that had solved it, but no, it's started flashing again.

We've found the back up battery and tested it, as the manual said a double flash on the recepticle indicated a low back up battery. It tested fine, all looked okay. We're confused. Any ideas?
 
Jul 18, 2017
13,215
3,769
40,935
Visit site
Gosh, sorry, yes. It's a buccaneer cruiser and the alarm is 650 Auto watch.
Have you inserted the 3 prong key into the socket. It needs to be held there for a short while to stop it flashing. If you just put it in for a second or two, the flashing will stop and then resume again. We have the same system in our 2018 Buccaneer.
 
Jul 18, 2017
13,215
3,769
40,935
Visit site
We have tried resetting it with three prong, but it just starts flashing again. Will try again though, thanks.
It needs to beheld in for a couple of seconds. Generally the flashing indicates that the alarm has been triggered at some time. There is an owner's manual for the alarm which should be with the documentation.
 
May 26, 2024
9
1
15
Visit site
Okay, an update on the alarm situation. We've discovered that the 12v back up battery was leaking, so wasn't providing the correct current to the alarm when the leisure battery fell below 12v. We'd been experimenting with using solar.
 

TRENDING THREADS

Latest posts