• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Fully Serviced Pitch

T

trevor11sqdn

Whilst connecting up on a fully serviced pitch over the new year I found that the connector supplied with the ball-valve assembly (for the aquaroll) did not fit the screw thread on the supply tap which was a larger diameter . Is there some connector available into which the blue hose will still "snap" fit and which screws onto the larger diameter tap threads ??
 
you will find on some sites that the connector has a screw thread but a serated nossle type fitting.this actually screws off(need pliers sometimes)and leaves only screw fixing.buy a snap on connector b&q etc that screws on to the tap and snaps into your aqua hose
 
Should you go to France you will find the same thing. A short visit to Mr Bricolage provided me with a small assortment of hose adaptors both male and female for the assorted site taps encountered. the good news is that they still size in inches as well as metric, so most can also be used in UK
 
Should you go to France you will find the same thing. A short visit to Mr Bricolage provided me with a small assortment of hose adaptors both male and female for the assorted site taps encountered. the good news is that they still size in inches as well as metric, so most can also be used in UK
Click to expand...
How do you manage a short visit to M. Bricolage? I usually get thrown out at closing!
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top