Help

[borderbilly]

Wheel lo ck stuck, key turns but won't come of

 

[otherclive]

That’s unfortunate, so I await Mel’s considered advice.

Assume you’ve used penetrating oil, and/or light tapping around the lock area.

 

[Dustydog]

Google and this is a very common problem with this Milenco model.
Suggestions offered:

Key not fully inserted.
Try spraying order or silicon over the entire lock. Don’t use wd40 or oil
Try gently wiggling the key to and fro in the lock.

Hope you succeed. Let us know the end result 👍

 

[borderbilly]

To late, soaked it in wd40, try again tomorrow, if I fail I will jack it up.

 

[Mel]

That’s unfortunate, so I await Mel’s considered advice.

Assume you’ve used penetrating oil, and/or light tapping around the lock area.

In our case we hit it with a hammer. Not sure that will help here; although could try tapping the key?
Locksmith?
Mel

 

[borderbilly]

In our case we hit it with a hammer. Not sure that will help here; although could try tapping the key?
Locksmith?
Mel

If it doesn't open, I will cut it off myself, or find those people who lift anything, the unmentionables, too tight to pay a locksmith, I am a Jock after all.

 

[Dustydog]

BB Maybe something Here will help

 

[toad a caravan]

I would suggest pouring hot water over it to expand the casting and help assist the freeing of the lock pawls,once off make sure it's dry and use an aerosol that contains graphite ...Good luck ...Gary