IDM3 Alarm

[fred cross]

I have an IDM3 alarm fitted to my 6 month old lunar lexon,it has the PIR, and the tilt sensor. When i check the alarm both of the above lights show, meaning that both are working. When i try to test the alarm the PIR works fine, but the tilt sensor does not work even if the van is level.

What if anything am i doing wrong, any ideas??

 

[WatsonJohnG]

How are you testing the tilt sensor?

Are you jacking the van up on one side ?

 

[Icemaker]

the tilt sensor on our idm 4 was allways a bit hit and miss, sometimes it went off just getting in the van other times i was able to move the van off the drive and on to the car without it going off. it is however adjustable through the control panel.

 

[fred cross]

How are you testing the tilt sensor?

Are you jacking the van up on one side ?

Hi, what i did was to level the caravan with the jocky wheel then set the alarm, next i tried to rock the van and lowered it on the jocky wheel.Can you adjust the IDM3 and if so how.

Many thanks for getting in touch

 

[Martin_E]

Mot sure if this will be of use or not http://www.bailey-caravans.co.uk/downloads/2004_handbook.pdf#search=%22idm3%20alarm%20instructions%22 see page 81