• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

idm3alarm system

H

harry_374370805

hi wonder if any off you can help i have fitted a new battery to my alarm and i can press the buttons on the keypad and get the beeps that tell me the state of the battery and if the pir is wworking (it is) the only thing i cant get to work is changing the 4 number security number i have tried 1234 but it does not work any ideas pls harry
 
My instructions state, To change personal code - Press NEW key, then press 1, now enter the old code, now enter your new code and confirm by pressing the NEW key. If the alarm battery has been flat for some time before you replaced it then entering 1,2,3,4 may be accepted in place of the old code. This is what happened to mine as when I bought the van I had no code and the battery was knackered, I replaced it and all was well. I have a copy of the user instructions if required although they are for an earlier model IDM but I am led to believe they are the same instructions.
 
hi terry thanks for that info i do not have a new button on my key pad only f and c plus nos 1 to 9 i do not have the code only know it is 1234 from new ta harry
 
From the IDM3 instructions:

Clearing the System back to Manufacturers Settings

If for any reason you wish to set the IDM back to its factory settings then the following procedure should be used:

1. Press "F", keep finger on the "F" key until 5 bursts are heard from the keypad buzzer. The IDM has now reverted to factory settings.

This can only be done when the system is disarmed

Hope this helps

Mike
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top