It isn't just caravan designers!!

Nov 11, 2009
25,940
9,583
50,935
I had thought my RAV 4 lights were not very good for night driving, but last night driving across Salisbury Plain in murky, wet conditions they were pretty awful. So I thought about upgrading them to higher intensity bulbs, thinking they cannot be this bad if they are LED, so they must be halogen. Turns out they are LED, but just look at what's required to access the bulbs, no wonder the manual says refer the car to a dealership. Null pointe to Toyota of Japan for this design feature.


Screenshot 2026-02-08 at 11.44.33.png
 

Sam Vimes

Moderator
Sep 7, 2020
2,805
2,282
12,935
I had a similar problem with my Yaris. Ripped my hands to shreds trying to get to the bulbs. Change the off side one but couldn't do the near side. Had to take it the local garage who had to remove the battery and headlight assembly.

I remember a friend some years ago tried to change a bulb on his Citreon something. Like you the only way was to remove the front - cost about £170. He was not amused and went to complain in the showroom. As he was there a salesman was showing a couple the same version. He interupted and said " Ask him how much it costs to change a headlight bulb". The salesman was not amused.
 
Nov 16, 2015
12,653
4,806
40,935
The fog lamp bulbs on the 2014 Santa Fe is the same, as OC's Rav 4, remove the front wheel of the side concerned, remove the inner wheel arch , or peel back, unbolt the bumper from the top of the radiator and then you can get into the fog lamp. I got it down to about 1/2 hour.
 
  • Like
Reactions: otherclive
Nov 16, 2015
12,653
4,806
40,935
I was talking to my son who is a team leader in the design dept of Jag Landrover.
(NO Booing yet please).
He was telling me that each part that is designed, that has to be removed to access another part, has to be able to be done in 10 minutes, using an "averaged large hand". Of a mechanic.
I am not so sure myself.
 
  • Like
Reactions: Dustydog
Jan 3, 2012
11,276
2,668
40,935
So far on my Ford Kuga Hybrid full led headlights are okay but if any problem arise I would take it to the dealer to sort out .
 

JTQ

May 7, 2005
4,204
1,927
20,935
Maybe being LED the design team did not anticipate a bulb change in the vehicle life?
If so I know of one case where they got that one wrong.
 
Jun 16, 2020
5,886
2,790
17,935
I have the all singing all dancing LED headlights. Auto dipping on both sides, camera controlled. But we went to a Great granddaughters school musical on Friday night in Newent. Murky horrible weather with some shallow flooding. And even with those lights it was not nice driving.

Perhaps it was just the weather.

John
 
Nov 11, 2009
25,940
9,583
50,935
So far on my Ford Kuga Hybrid full led headlights are okay but if any problem arise I would take it to the dealer to sort out .
It’s not so much the full headlamps that are the problem as by definition there should be no oncoming traffic. It’s the dire dipped beam. I believe there is some adjustment for height which I will use to raise them a bit more.
 
Nov 11, 2009
25,940
9,583
50,935
Maybe being LED the design team did not anticipate a bulb change in the vehicle life?
If so I know of one case where they got that one wrong.
That’s probably the design philosophy as LEDs do/should have exceptionally long life.
 
Nov 11, 2009
25,940
9,583
50,935
I have the all singing all dancing LED headlights. Auto dipping on both sides, camera controlled. But we went to a Great granddaughters school musical on Friday night in Newent. Murky horrible weather with some shallow flooding. And even with those lights it was not nice driving.

Perhaps it was just the weather.

John
Mine have auto dip, which I don’t use. I can understand that the weather conditions did not help, but I had concluded that they are poor even on dry nights. It’s rural roads such as crossing Salisbury Plain, or B roads that are their weakest point. Main A roads or motorway not such a problem.
 

Sam Vimes

Moderator
Sep 7, 2020
2,805
2,282
12,935
I was talking to my son who is a team leader in the design dept of Jag Landrover.
(NO Booing yet please).
He was telling me that each part that is designed, that has to be removed to access another part, has to be able to be done in 10 minutes, using an "averaged large hand". Of a mechanic.
I am not so sure myself.
Sure.... But if you have to take out 6 pieces to get to a lightbulb that's 1 hours Labour
 

TRENDING THREADS

Latest posts