- Apr 18, 2024
- 29
- 12
- 35
Having repaired the shower tray using fiberglass matting/epoxy then white gel coat, I noticed that when I pushed the flush on the toilet that loads and loads of black bits came flooding through! Also, it seems like there is pink stuff in-between the toilet bowl and it's base, it swivels. Is there any way to remove the bowl so I can see what the problem is? The black bits came from the header - as most will know, and after removing the flush unit, which had broken a clip on the bottom, the tank was full of this black mould stuff. It took me at least 40 minutes to clean out all but the last remnants using rags and wet wipes, why don't people run them through with water every now and again to keep them clean!