Hi all, i have a 2003 Bailey Pageant Loire ,which has developed a bad leak around the kitchen tap . I assume a seal has cracked over the winter .I have taken the top off to see if i can get it appart,and after trying to undo the large nut [ not sure if left or right hand thread ]the whole tap has come lose on its base .Could some one please tell me if there is a repairable seal in the tap body and how, if not do i get access to the bottom of the tap to take it off and replace whole tap .With thanks Graham .
-
We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.
leaking tap
- Thread starter graham_374324980
- Start date
Hi
Had the same problem. Just stick this in your web browser.
http://www.notjusttaps.co.uk/spares-Valves-35mm-cartridge.htm
Undo the grub screw behind the blue / white plasict marker, take off lever then unscrew the body of the tap. take out crtrige and replace with new unit.
The new caryridge takes a couple of days to turn up. Don't start to dismantle the whole tap like I did.
Good luck
Pete
Had the same problem. Just stick this in your web browser.
http://www.notjusttaps.co.uk/spares-Valves-35mm-cartridge.htm
Undo the grub screw behind the blue / white plasict marker, take off lever then unscrew the body of the tap. take out crtrige and replace with new unit.
The new caryridge takes a couple of days to turn up. Don't start to dismantle the whole tap like I did.
Good luck
Pete
Thanks for your replies but can you tell me if the large nut under the tap lever is left or right hand thread ? i have tried to undo it both ways but it wont shift and now the tap has come loose from the worktop ,so i will probably have to get underneath somehow to tighten it . thanks ,Graham .
