• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Mondeo battery feed in the boot?

J

JandP

There are 2 fuses marked "trailer" in the central fuse box but does anyone know if these are wired through to the boot, and if so where would I find them on an Estate? I am wiring the tow bar and I need 2 battery feeds for the bypass relay and the charge relay. You guys have been really helpful with my other questions so I hope you can give me the right answer this time! Thanks, Jim.
 
On the mk3 they come down the near side and finish behind the wheel arch under the side cover.

However, on the mk3 their far to thin and totally inadequate for UK requirements, my fitter used the *** lighter sockets wiring on the other side but that's only 10amp so still not good enough.

This apparently is all thanks to Fords German based specifications?! so in short, you'd be better off running your own decent wiring direct from the battery
 
Hi J+P why not supply the feed directly from the battery with two correct size fuseable links?Find out the current draw(amps),and devide it by 12(volts),the figure gained will be the correct size of cable needed in amps to safely do the job.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top