Motor mover cutoff switch

[DeliDave_]

Am trying to fit a cutoff switch to my Reich motor mover,its never had one although I have never had a problem.The main cable which I need to cut is 10sq mm and I can only get uninsulated ring terminal with a 10mm dia hole.However when it was fitted they used insulated red crimps.This was in 2004 and now yellow is the maximum size (6 sq mm).Has anyone fitted their own mover,if so where did you source the crimps.If not I'll have to shrinkwrap the terminals after Ive crimped them.

 

[Sproket]

Dave,
When I moved my switch I got them from here & put some a piece of shrink tube on each end

 

[DeliDave_]

Hi Sir Sproket CJ ( BAR)

I think that looks like the solution,many thanks to you.

Best wishes

 

[DeliDave_]

Hi Sir Sproket CJ ( BAR)
Can I ask how you crimped it,I have a couple of ratchet crimpers but nothing big enough for 10mm cable,£62 sounds a lot to do two terminals lol

 

[Sproket]

I needed a new set of crimps so I bought a set of Cheap-n-cheerfull one's like these.......

 

[DeliDave_]

That'll do nicely,thank you
You are the maestro of the magic box