• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

MR SHIFTER 2

B

billy2

Can someone help? i have bought second hand a Mr Shifter 2 it has got an alloy plate under the ball, i believe to fit the Alko hitch. My question is are there different sizes of plate for the alko hitches? my hitch is the Alko AKS 3004 and the plate does not fit up to it snugly perhaps they dont. Have mailed shifta products but never got the answere.Thanks Bill
 
Probably I will be of little help but I used to have the Shifta Mk 1 together with Alloy adaptor for Alko 2004. The Plate was not a "snug" fit, it had a machined slot lenght-wise along the top into which the hitch sat; if I recall correctly with about 1-2 mm clearance.

He is likely to be at the NEC; ask someone here to nail him for an answer if you can wait.
 
Probably I will be of little help but I used to have the Shifta Mk 1 together with Alloy adaptor for Alko 2004. The Plate was not a "snug" fit, it had a machined slot lenght-wise along the top into which the hitch sat; if I recall correctly with about 1-2 mm clearance.

He is likely to be at the NEC; ask someone here to nail him for an answer if you can wait.
Click to expand...
Thanks for that there are 2 half moon cut outs near the front that the alloy hitch plate that i thought that the Alko would fit in but the cutouts i think need to be bigger as the hitch sits on them not in them Bill
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

Back
Top