• Weโ€™re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. Weโ€™ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Number plate holder.

Have two cars that could tow van,is there anything available to swap plates easily.At the moment one is fitted by dealer and I pop the other on top with foam tape that comes off easily.But I only use the second motor to pick up from storage at the moment and I will be going furthur hopefully so need something more secure.
Thanks for any assistance
 
I did buy a chrome plastic number plate holder from Lidl thinking I could swap plates over by undoing a couple of screws but it won't fit in the recesss on our Indiana.Its tricky to work out something secure but easy.Thanks anyway.
 
Following your post RogerL I found these on fleabay,am wondering if these fixed with Sikaflex would be strong enough,what do you think?
http://www.ebay.co.uk/itm/Maypole-Number-Plate-Holder-Allows-you-Switch-Plates-/120678553073?pt=UK_Trailers_Transporters_Parts&hash=item1c190095f1
 
I use a very heavy duty velcro It was advertised in one of the mags, I have three strips on the back of each plate & they line up with the ones on the van, a firm press & they lock together & a wood spatular up the back to prise apart when the other plate is required to be put on
smiley-laughing.gif

This is the stuff from 3M, they call it Dual Lock Fasteners
smiley-wink.gif
 
Deli Dave_ said:
Following your post RogerL I found these on fleabay,am wondering if these fixed with Sikaflex would be strong enough,what do you think?

Can't see why not, they stick roof mounted sat dishes on with the stuff
smiley-laughing.gif
 
Hi Sir Sproket

Might give that velcro a shot first as it isn't obvious whereas those clips might be seen and plate theived
smiley-laughing.gif


Best wishes
 
Sikaflex is what I used to bond my solar panel brackets to the caravan roof so it should hold the number plate bracket.
The dual lock velcro should be ok though Dave, I used ordinary domestic type velcro to hold the plastic surround of our microwave oven in place and it does the job with no problems.
 
I used velcro on my old caravan and it lasted for aver ten years with no problems. Don't be tempted to use a massive amount as it is then difficult to swap the plates over. I had two strips vertically about 5 cm from the ends of the plates.
 
graham_somersham said:
I used velcro on my old caravan and it lasted for aver ten years with no problems. Don't be tempted to use a massive amount as it is then difficult to swap the plates over. I had two strips vertically about 5 cm from the ends of the plates.
As above! Cheap and simple.
 

TRENDING THREADS

Latest posts

Back
Top