Reich mover

[caslau]

Hi, can anyone tell me what the gap should be between the grooved rollers on my mover and caravan tyre should be, i recently replaced rollers and tyres. The pressure in the tyres is 62 psi, but when i used the mover on monday the rollers did not turn the wheels just right.

 

[sheila_374397204]

Don't know whether this is any use but we turn the wheelbrace until the green can be seen.

 

[sheila_374397204]

Don't know if this is any use or what you mean but we turn the wheelbrace to move the rollers until the green can be seen at the left hand side.

 

[JTQ]

It should be 15 mm and I found it best to make sure to fully wind on the roller not stop at the first hint of green.

 

[Martin_E]

The gap is 15-20mm I think the block that comes with the mover is 20mm