Replacement Catch for Habitation Door Fly Screen

Feb 9, 2013
73
0
0
Visit site
Can anybody tell me where I can get a replacement part for my habitation door fly screen retaining clip ?.
One of the photos show the clip that has lost one of the two little lugs from one side that fits into the Fly Screen assembly the part that you pull down. Second photo shows where it should go.
The van is a Auto Trail 2005 Tracker but I'm sure this kind of set up is on many vans and not only At's.
I just caught it with the lid of the dustbin and bang up it flew and off came the lug...

]https://www.facebook.com/photo.php?fbid=1220866234596469&set=pcb.962228920511086&type=3&theater[/img]
 

Kate Taylor

Administrator
Jul 18, 2012
297
0
0
Visit site
Spare parts are available from caravan accessory stores, according to Nigel Hutson on our sister magazine Practical Caravan's website.

Read all about DIY fixes for Seitz blinds and flyscreens in his articles here
and here.
 

gjh

Jul 28, 2011
618
1
0
Visit site
Your handbook might tell you which manufacturer's door is used, to allow you to search.

If not, try Googling and selecting Images to see if there is a photo of the right one.

Graham
 
Feb 9, 2013
73
0
0
Visit site
Now sorted. Drilled a small hole in the side of the clip and used a nail with the head cut off as a kind of hinge pin. A bit tricky drilling the hole in the correct place by hand but it's now fully working. This is not just a AT problem or British built problem as I was contacted by a Benimar owner with same problem, if the catch was made of aluminium no real extra weight but a much stronger longer lasting product. Thanks to all that tried to help. :)
 

TRENDING THREADS

Latest posts