• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Replacing a battery box locker

Dodger524

Dodger524

Whilst manoeuvring our caravan recently on a sloping site with the motor-mover I managed to wipe off the open battery box lid breaking the hinges off the box in the process.

I have brought a new box and now face the task of fitting it, the first problem being removing the damaged box.

My concern is breaking the seal of the mastic sealing tape on the existing box which is doing an excellent but unwanted job of holding the box in place.

Suggestions of how best to go about this in a way that avoids damaging the side of the ‘van will be most welcome.
 
You could try a plastic scraper, the sort used when defrosting a freezer
White spirit will soften and help to remove the excess followed by methylated spirits to clean the surface ready for new mastic
 
Parksy said:
You could try a plastic scraper, the sort used when defrosting a freezer
White spirit will soften and help to remove the excess followed by methylated spirits to clean the surface ready for new mastic
Click to expand...

Thanks for your reply. I had a half formed idea of using plastic wedges to gradually ease the box out and your suggestion firmed it up. I have ordered 2 packs of 3 cheap plastic scrapers sold be Draper to try.
 
Follow Parksy's schema with the white spirit then meths - new mastic strip will not adhere to old so the surface needs to be thoroughly clean before fitting the new box.
 
Just a follow up for information.

In the event the old box came out quite easily just one gentle push needed from the inside of the caravan to persuade it to leave.
One of the plastic scrapers were used to remove the old mastic, which came off reasonable cleanly with just a couple of stubborn areas.
I used mastic tape to provide the sealing strip and left this overlapping the box flange by about 3mm. This was trimmed off after the box was screwed in place to leave a neat and hopefully waterproof edge.
I also took the opportunity to tidy the battery connection by taking just one pair of cables into the van instead of the original 4 pairs and using a couple of meter blocks to terminate them neatly within the van.
Overall some 5 hours work and an outlay of about £115 pounds. So I guess that's £115 worth of experience and a lesson learned.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top