sattelite tripod

Jan 3, 2007
567
1
0
Lee....I bought 1.5m steel rod, about the bore of a tent peg and cut this into three pieces. Filed down one end, bent the top over and fitted a plastic sleeve over the bent top. Then used each on on the tripod legs...hope this makes sense.

Picture attached? (if it works) that show them in use.

http://www.putfile.com/pic.php?img=5801435
 
Feb 20, 2006
68
0
18,580
HI ,lee i use 3 hardstanding pegs and 2 rubber ladders from the awning ,put them over the tri pod coss bars .this has kept my tripod still in some strong winds.

colin
 
Feb 11, 2007
575
0
0
I drilled a hole at an angle through the legs and put a awning peg through the hole and as these holes are all at an angle it does not require additional guy lines,so far had no problems.
 
Dec 4, 2006
6
0
0
I drilled a hole at an angle through the legs and put a awning peg through the hole and as these holes are all at an angle it does not require additional guy lines,so far had no problems.
many thanks for your ideas,i'm sure one of these will do fine.

once again thanks.

Lee
 

TRENDING THREADS

Latest posts