I own a 2015 Elddis Avante 576 and the left hand side of the caravan has dropped 20-30mm only from the A frame to the side its bent the floor. This has caused other issues but I was wondering if anyone has ever fixed this problem.
Its only really from the front of the van to the wheel its worse by the suspension which only has 300mm from the large frame.
I did think about undoing all the fixtures and jacking the edge slowly back up then welding some galvanised box or U frame to the A frame however without some kind of trianglar support this would probs not hold it.
Just wondered if any techincal experts out there might have done this before.
Many Thanks
John
Swindon
Its only really from the front of the van to the wheel its worse by the suspension which only has 300mm from the large frame.
I did think about undoing all the fixtures and jacking the edge slowly back up then welding some galvanised box or U frame to the A frame however without some kind of trianglar support this would probs not hold it.
Just wondered if any techincal experts out there might have done this before.
Many Thanks
John
Swindon

Last edited: