Stabilisers

[Dan_5040593]

When i connect my Stabiliser to the van when we are

going on a journey everything is ok. But once we get to

the site the Stabiliser has disconnected what causes

this.Am i wasting my time connecting the stabiliser at

all.

 

[Ron_5041484]

Hi Dan . If your stabalizer is the bar type it's possible that

the bracket on the A frame is sited incorrectly , and the bar pulls out on maximum lock , try the vehicle on max lock both

ways, it could be as simple as that .. R J

 

[Jaydug]

The support bracket on the A-frame should hold the leaf approximately 4" from the end of the leaf. My guess is that it's too close to the end and slips off the shoe when you turn left.