Trim

[Mikc16]

hey, anyone know how what I can use to fix the trimming place? We have recently changed the trim, but unfortunately it keeps coming out any help as always appreciated.

 

[Jcloughie]

What works for many things is mitre glue. I have used it for countless things.

There are lots of makes, this is an example.

John

 

[Mikc16]

Is it quick drying

 

[otherclive]

Is it quick drying

The link above says 15 seconds

 

[borderbilly]

Is it quick drying

Yes its quick drying. Small bottle is the glue and the tin is aerosol-activator, about 30 seconds.

 

[Beachball]

Is it quick drying

Clean and quick- drying in 15 seconds

 

[audiorob]

If you prefer a tape roll cut to the size required then this may be of use. I have not used this particular manuf but relied on a 3M black reel when reaffixing the rubber door seals on a series of Ford Focus cars - you often see strips hanging out of the door sills when the OEM adhesive fails. Advertises indoor or outdoor and waterproof use.

 

[otherclive]

If you prefer a tape roll cut to the size required then this may be of use. I have not used this particular manuf but relied on a 3M black reel when reaffixing the rubber door seals on a series of Ford Focus cars - you often see strips hanging out of the door sills when the OEM adhesive fails. Advertises indoor or outdoor and waterproof use.

As you say a common fault on the Focus, my daughter’s 2014 seals just unbonded themselves.

 

[RogerL]

As you say a common fault on the Focus, my daughter’s 2014 seals just unbonded themselves.

"just unbonded themselves" - is that a technical term for fell off?

 

[borderbilly]

"just unbonded themselves" - is that a technical term for fell off?

A posh term for " Its F*£$"D.

 

[otherclive]

"just unbonded themselves" - is that a technical term for fell off?

No they didn’t fall off. The lower section at the bottom of the door could became loose and could be caught as the door shut then dangling down.