We've just done our maiden voyage in our new Xplore 304. A few niggles which I'll detail in another saga but one I want to fix quickly since we have another trip coming up concerns the waste pipe from the kitchen sink and bathroom basin.
Both sink and basin waste pipes are connected to the opposite points of a T fitting. The stem then goes out the side of the van to the waste master. Problem is that if the kitchen sink or bathroom basin are being used at the same time, when one has the plug pulled to empty it the other plug gets push up because the air is being forced back up the pipe. Mostly its annoying but possibly some waste water may also makes its way up the pipe which wouldn't be good.
I suspect that changing the fitting to something like a swept T or even a Y fitting might help but maybe you folks have other ideas. A source for parts would also be good if you have any recommendations.
Many thanks
Both sink and basin waste pipes are connected to the opposite points of a T fitting. The stem then goes out the side of the van to the waste master. Problem is that if the kitchen sink or bathroom basin are being used at the same time, when one has the plug pulled to empty it the other plug gets push up because the air is being forced back up the pipe. Mostly its annoying but possibly some waste water may also makes its way up the pipe which wouldn't be good.
I suspect that changing the fitting to something like a swept T or even a Y fitting might help but maybe you folks have other ideas. A source for parts would also be good if you have any recommendations.
Many thanks