• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

waste pipe

Does anyone know where I can purchase the solid type waste outlet that joins the outlets together ? .It looks a lot easier than messing about with two pipes into my waste master
 
Hi Andy.

Towsure stock them as does any caravan accessory shop. I have got a setup of two Y piece adaptors on my van the first in the line joins both outlets to one pipe which is what your looking for and the second one reverses the pipe process so that I can use two waste masters. Saves time constantly trundleing a waste master especially when your a full timer like me.

Atb Steve L.
 
Hi Andy

Do you mean one of these:

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItemVersion&item=200456151270&view=all&tid=470773619010
I am pleased with my purchase from this seller. I ordered it last Saturday and it arrived the following Tuesday. It fits fine and I am planning on getting a length of plastic waste pipe so that I can extend to use on serviced pitches in UK and on the Continent.

On the other hand I think it would be easy to make up the whole thing yourself. I'll post the size of the pipe after I'm next in the 'van.

Tim
 
Its 42 mm and you can get the parts from any DIY outlet such as B & Q

I have a long outlet to allow for sloping pitches and it can be fitted either to the left or the right

It just push fits the modern outlets

 
Its 42 mm and you can get the parts from any DIY outlet such as B & Q

I have a long outlet to allow for sloping pitches and it can be fitted either to the left or the right

It just push fits the modern outlets

OOPS 32MM--oh for an edit!!
 
Its 42 mm and you can get the parts from any DIY outlet such as B & Q

I have a long outlet to allow for sloping pitches and it can be fitted either to the left or the right

It just push fits the modern outlets

I purchased a length of 42mm pipe from B&Q but it is nearly impossible to fit it into the outlets as fitted standard on my 'van - any siggestions??

Hovis
 
You can purchase a black plastic adaptor where you plug in the two short lenghts of flexable waste pipes and connect a single small length of flex pipe to the outlet, a lot neater than the picture.
 
Hovis

It should be 32mm and then it will push fit into the outlets fitted to new vans

Sorry about the error which I had quickly corrected

You could use short lengths of caravan waste but it shouldn't be needed
 
Hovis

It should be 32mm and then it will push fit into the outlets fitted to new vans

Sorry about the error which I had quickly corrected

You could use short lengths of caravan waste but it shouldn't be needed
Thanks for that, However the 32mm is still a b***ar to push into the 'vans existing outlet!!

Hovis
 
Has anyone connected the two pipes together under the caravan before the outlet?

On my Bailey the pipes run together and one of the pipes obstructs the holes for the jacking point on the chassis.

So how can I connect the two pipes together when they are running parallel?

This would mean that I will only have one outlet pipe which would be a bonus.
 

TRENDING THREADS

Latest posts

Back
Top