• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Water pump over run problem?

P

PeteE

After using the van this weekend (2004 Lunar Quasar 525) I had found a problem with the main water pump over running/staying on.

Sometimes it happens after using a tap other times it just randomly come on.

It run to the point it forces water to leak out of the "inlet" on the exterior of the caravan.

. I suspect it might something to do with the water pressure switch I found under the seating, but I am not sure how this should be adjusted to the correct pressure? Its a simple screw in/screw out adjustment??

Thanks in advance,

Peter
 
Turn the screw on top of the switch anti CW to allow the switch to operate earlier.

You may find you are having to adjust depending on the battery voltage (if not on hookup)
 
If it is a Wale unit you may be able to fit their IC (intelligent controller) to the back of the inlet socket and dispense with the pressure switch. They claim this is independent of battery voltage and with some back experience i would agree.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top