• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

whale pressure switch connectors

F

forry1

Hi guys. This is my first post.
I have a bailey ranger. I accidentally snapped the gold flat connector that connects the wiring into the whale pressure switch for water pump/heater. It has a yellow spade cover. Anywhere i have looked to buy this part only provides the part with the full whale switch.

I am looking for advice on where to buy this part. I have attached images for reference.
1030064%20(2).jpg


It is the gold part that I need. Any help would be appreciated.
 
Thanks Craigyoung.

Hope this works. see below

Hi guys. This is my first post.
I have a bailey ranger. I accidentally snapped the gold flat connector that connects the wiring into the whale pressure switch for water pump/heater. It has a yellow spade cover. Anywhere i have looked to buy this part only provides the part with the full whale switch.

It is the gold part that I need. Any help would be appreciated.

https://www.primaleisure.com/catalogimages/products/1030064 (2).jpg?width=840&height=750&mode=crop&scale=both
 
The gold part as you call it is part of the switch and is not available as a stand alone item.
Buy a new pressure switch complete.
 
Thanks Damian. I was thinking a could solder this rather than having to get a full pressure switch.
Not sure what sort of connection i would get with this.

thanks for your help
 
Judging from the picture the gold male is a tight fit in the housing. If you had another male could you push it firmly above or below the stub of the broken part into the housing? If so you could crimp this onto the connecting wire in place of the current female and save yourself near £30! Personally I would be careful of soldering wires as obviously when the gold stub heats so does the surrounding plastic!
 
I think it is a V3 micro switch
F1616713-01.jpg
RS components £3.89 as to if you can actually change the switch I don't know, I would try removing old one first.
 
Thanks for all your help guys. ericmarks, the connector look like the part I need.
I have ordered this so see how it goes. if it doesn't fit then I will just need to get a new whale pressure switch.

cheers guys
 
ericmark said:
I think it is a V3 micro switch
F1616713-01.jpg
RS components £3.89 as to if you can actually change the switch I don't know, I would try removing old one first.
Click to expand...

Sorry mate , totally different , microswitch,.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top