How to convert truma smart water switch to whale pressure switch wu7207

[Tony heathcote]

How to convert bailey water pressure smart switch to whale pressure switch wu7207

 

[Martin_E]

It might be useful to say what Bailey smart switch you are trying to convert 🤔

 

[Tony heathcote]

It might be useful to say what Bailey smart switch you are trying to convert 🤔

Sorry switch is ultraflow smart switch looks like a black mushroom with three connections batt +pump-batt - can not find how to connect wiring to whale pressure switch wu7207 as it as it only as two connections thing you for replying tony

 

[Martin_E]

If I remember correctly……
There will be the permanent live, then the switched live that goes to the pump positive connector, use these on the wu7207 then the negative off the smart switch loop back to the negative on the pump housing. I did something similar on the old model Truma micro switch that used to be fitted to coachman vans

 

[Tony heathcote]

Thank you I will try that as the truma switch are no longer available and truma service are useless do not reply to any emails

 

[Sliderule]

Thank you I will try that as the truma switch are no longer available and truma service are useless do not reply to any emails

 

[Sliderule]

Thank you I will try that as the truma switch are no longer available and truma service are useless do not reply to any emails

Hi Guys, I have the same problem with my Bailey Phoenix. Can I just ask Tony, what arrangement of wiring connections worked? What colour wires to which spade connectors on the Whale pressure switch?
Cheers
Joe

 

[Martin_E]

Hi Guys, I have the same problem with my Bailey Phoenix. Can I just ask Tony, what arrangement of wiring connections worked? What colour wires to which spade connectors on the Whale pressure switch?
Cheers
Joe

I think the switch is marked as + or -, the +’s go where I said above, in theory it matters not what terminal on the pressure switch they go, after all it’s a switch it will make or break, the - goes to the - on the pump housing.

 

[Sliderule]

Thank you for taking the time to reply Martin Just in case anyone might find this thread helpful... I swapped the Truma smart switch for the Whale pressure switch today. The photo identifies the connections (Bailey colour coded cables). I connected the “-“ cables labelled ‘pump’ & ‘batt’ to the Whale switch and left the ‘batt +’ disconnected. The Whale switch needed a little adjustment and works as it should.
Thanks again
Joe

 

[Hutch]

Thank you for taking the time to reply Martin Just in case anyone might find this thread helpful... I swapped the Truma smart switch for the Whale pressure switch today. The photo identifies the connections (Bailey colour coded cables). I connected the “-“ cables labelled ‘pump’ & ‘batt’ to the Whale switch and left the ‘batt +’ disconnected. The Whale switch needed a little adjustment and works as it should.
Thanks again
Joe

Thanks for that, my Coachman's Truma switch is still working just now, but probably not for much longer, I will get a new switch ready for the inevitable day.

 

[Kjb0070_0]

The Truma switch seems to have one connection to the pipe, compared with two on the whale switch. How do you get around this?