Kampa rally 390l air awning

Toggle sidebar Toggle sidebar
R

Redlac

Aug 8, 2017
10
1
18,515
Visit site
Hi
I have a kampa 390 air awning, the last air beam seems to buckle in wind near the middle, Contacted kampa when I bought the awning regarding air pressures. They told me recommended pressure was 7psi but not to go above, I have been pressurising it to 6.5 psi, Can anyone tell me if this is too low.
Thanks guys.
 
otherclive

otherclive

Nov 11, 2009
21,660
6,991
50,935
Visit site
If you go higher than the recommended pressure you risk over pressuring it when the weather is hot. I would check your guy line arrangements and ensure it's pulled through properly at the top. Are you on an uneven/sloping pitch that could be affecting alignment.
 
Dustydog

Dustydog

Jun 20, 2005
18,121
4,016
50,935
Visit site
Very strange ! My older Kampa Rallye Air 390 electric air pump cuts out at the recommended maximum pressure of 11psi.

Where has 7 psi come from??
It was rubbish and resides in the loft . So now I see the psi are being significantly lowered but how does that affect performance in adverse weather?

Sorry the air boys , I’m sticking to my Izzy carbon fibre x poles
 
  • Like
Reactions: borderbilly and Buckman
GUMPY

GUMPY

Dec 27, 2022
200
110
635
Visit site
Dustydog said:
How old is yours?
It wouldn’t surprise me the psi has been lowered😉
Click to expand...
Honestly don't know as I bought it second hand. My suspicion is 2017 or so as they didn't make the Expert Classic 380 for very long.
I might try a lower psi next time out, tubes are very hard at 9psi.
 
Mel

Mel

Moderator
Mar 17, 2007
5,593
1,529
25,935
Visit site
Our old Kampa was 9 psi. It went pop in 2018. However this was more due to 8 or 9 years of heavy use( 100mph winds and being left up for weeks at a time on a seasonal pitch 😊). I couldn’t complain tbf.
Mel
 
  • Like
Reactions: Dustydog
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Moderators online

COMPANY
RESOURCES
FOLLOW
Top Bottom