Mounting a 13 pin socket

[blues2rock]

New caravan 13 pin plug, so a nice Sunday afternoon job to change the 7 pin 12N & S sockets to a nice new 13 pin one. WRONG. The rubber boot on the 13 pin plug is too large to go through the existing plate! Back to dealer - no they haven't got any 13 pin mounting plates, nor it seems has anyone else locally. So a bit of a (temporary) bodge until I can get a plate with the right size hole. The point of all this is does anyone know where from?

PS Thanks to all who offered suggestions re fixing my fire extinguisher.

 

[xtrailman]

Your local towbar fitter will have one.

Or you can drill out the the old bracket hole, with a hole cutter.

I think its 32mm. clamp a piece of wood at the back of the old bracket and secure in a vice, drill the pilot hole into the wood.

Just done this myself, as i wanted to use my old socket holder which i made from stainless steel.

If you dont have a hole cutter use a jigsaw, but it is awkward.