• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

mover

J

joner818

please can anyone help the motor mover grip wheel keeps slipping on the tyre, the model is a trauma mk2 with the what looks like stuck on grit on a roller, the problem is when it get the smallest amount of muck on tyre it slips, hence no grip the wheel when disengaged is 20mm which it states in the book can you get new type rollers which look like alloy or any other remedy thanks?
 
Check that the grit isn't worn away or peeling off if ok and the mover isn't too difficult to engage onto the tyres then you could move the unit nearer the tyres a fraction but mover should work ok if gaps are correct and rollers in good condition.

I'm pretty sure that i fitted a set of the new aluminium rollers in place of the old grit type but would check adjustment first as rollers ain't cheap.

Mike.
 
You must log in or register to reply here.

TRENDING THREADS

Latest posts

Back
Top