- Jul 18, 2017
- 16,247
- 5,178
- 50,935
but using a impact driver? If we came across really compacted hard standing, I would use a masonery bit to drill a pilot hole and then use the screw pegs.The drill screws them in, incase you didn't know.
but using a impact driver? If we came across really compacted hard standing, I would use a masonery bit to drill a pilot hole and then use the screw pegs.The drill screws them in, incase you didn't know.
Ours were quite long and we never pitched the caravan on the beach. No issue with high winds and we encountered so really strong winds.How do all the wonderful pegs recommended in this thread cope with very sandy soil and high winds?
Life's to short to flaf about with all that mullarkey.but using a impact driver? If we came across really compacted hard standing, I would use a masonery bit to drill a pilot hole and then use the screw pegs.
One site we stopped at in the Outer Hebrides was on "machair" and no-one seemed to have very good pegs, at least not good enough when a storm force 10 came in - even the campers flattened their tents and slept in their car!Ours were quite long and we never pitched the caravan on the beach. No issue with high winds and we encountered so really strong winds.
Mine didn’t at Freshwater East. CMHC where the pitches c were sand and soaking wet as a gale hit. Spent most of the night rigging extra guys and holding it down. So next day went out and bought some extra long J shaped pegs for marquees. After that I always had four J pegs with me to supplement the other fixings.How do all the wonderful pegs recommended in this thread cope with very sandy soil and high winds?