Porta Potti help

Aug 16, 2020
2
0
10
Visit site
I’ve been gifted a Porta Potti 165. The blade won’t close and seems to flapping around inside the waste tank. I can’t work out how to fix it. Any ideas
I’ve added a photo (the outside is just mud, not sure about the inside But can’t be bothered to clean it if it’s no good.
 

Attachments

  • D828A414-1F2C-44AC-A16E-4D69305A4795.jpeg
    D828A414-1F2C-44AC-A16E-4D69305A4795.jpeg
    1.1 MB · Views: 11
Jan 19, 2002
1,472
409
19,435
Visit site
My recollection is that the front handle was pulled and pushed to open/close the sealing blade - usually black - that therefore slid from front to back. You might be able to see more if you rotate the spout 90+ degrees where the bayonet fitting aligns and can be removed.
Helpfully there is a full manual available here:
 
Aug 16, 2020
2
0
10
Visit site
I’ve managed to get the lip seal out so I can see better, but can’t work out where the blade should sit
 

Attachments

  • image.jpg
    image.jpg
    1.1 MB · Views: 1

TRENDING THREADS

Latest posts