Powrtouch classic motor mover control unit issues

Jun 29, 2025
2
0
10
Our motor mover stopped working on the l/h side. I switched the l/h cables in the control unit to the r/h hand terminals and the r/h cables to the l/h terminals resulting in the l/h side working bow, and the r/h side not working. That would seem to me to indicate a faulty control unit.
Are these units repairable or is there somewhere I can get a reconditioned unit please.
Any help, information and, or advice would be much appreciated.

Thank you.
 
Oct 19, 2023
566
450
1,135
Our motor mover stopped working on the l/h side. I switched the l/h cables in the control unit to the r/h hand terminals and the r/h cables to the l/h terminals resulting in the l/h side working bow, and the r/h side not working. That would seem to me to indicate a faulty control unit.
Are these units repairable or is there somewhere I can get a reconditioned unit please.
Any help, information and, or advice would be much appreciated.

Thank you.

Are these any use to you? (I've never used either so it isn't a personal recommendation)

 

JTQ

May 7, 2005
3,874
1,604
20,935
I have used A&R Electronic Developments, and it was excellent service in every way. Good guidance, super fast turn round, good value and the results are still working well.
No connection other than as an impressed user of their services,
 
  • Like
Reactions: Beardy and Dustydog
Jun 29, 2025
2
0
10
Thank you to everyone who responded and thank you for your various suggestions. I have contacted Powrtouch and I am awaiting their reply although it would seem that one of the control unit repair options that have been mentioned will be my eventual course of action.
Thanks again.
 

TRENDING THREADS

Latest posts