Hi All
Just purchased a 1998 Bailey Senator California and am having trouble with the PIR on the alarm system. I have tracked it down to a broken connection on the white lead in the cable where it connects to the plug, which has broken away. It looks far too fiddly to try and re crimp or solder, so I thought the best solution would be to replace the cable. The plug is about half an inch wide, rectangular and white with 4 pins and two small wings either side to locate in the socket on the control box.
Anyone know of a good source for spare parts where I could get a replacement cable, or a plug that I can make myself, or have any better ideas?
Thanks in advance
Shaun
Just purchased a 1998 Bailey Senator California and am having trouble with the PIR on the alarm system. I have tracked it down to a broken connection on the white lead in the cable where it connects to the plug, which has broken away. It looks far too fiddly to try and re crimp or solder, so I thought the best solution would be to replace the cable. The plug is about half an inch wide, rectangular and white with 4 pins and two small wings either side to locate in the socket on the control box.
Anyone know of a good source for spare parts where I could get a replacement cable, or a plug that I can make myself, or have any better ideas?
Thanks in advance
Shaun
