Rimor Kilig 695 2025

Dec 24, 2023
16
3
1,515
We are about to pick up a new Rimor mid-March. The only way we can see to empty grey waste is to pull the level on the side of the motorhome. We would like to use a pipe connected to a watermaster or service pitch drain. Is there a way of doing this?
 

Mel

Moderator
Mar 17, 2007
6,262
2,351
25,935
Congratulations on your purchase. I can’t help I am sorry but although this is forum is primarily populated by touring caravan users; there are a few with Mohos who may be able to advise.
Mel
 
Jan 3, 2012
11,260
2,658
40,935
Hope you enjoy your new purchase but sorry I cannot I am a caravan owner, but there are some who have a motorhome might be able help you .
 
Apr 23, 2024
635
511
1,135
From my limited experience with Motorhome waste systems m/homes have a waste water tank which can be emptied periodically by opening the valve is yours like that? , the ones I've come across have been metal , but some are now plastic . the metal lever types which is the empty valve usually has a internal thread on the end , probably 25mm you would need to find a suitable adapter - see 1st photo. If its plastic ( see second photo) measure the outlet diameter and go to your local hardware store and buy a length of flexible plastic pipe with fits snugly over it and lead it to the drain . If it's clear plastic hose about 13mm diameter you could then cover it in the corrugated gray tubing (28.5mm dia)( to hide any bits ) which is normally used on caravans for the waste water to service pitch drain point. It may be a bit of experimentation to get the pipe to fit the end of the drain valve and a roll of duct tape may help - please post a photo of your drain lever.
 

Attachments

  • 25mm male to 13mm hose adapter-001.jpg
    25mm male to 13mm hose adapter-001.jpg
    20.5 KB · Views: 0
  • grey water waste tap-plastic-001.jpg
    grey water waste tap-plastic-001.jpg
    13.1 KB · Views: 0

TRENDING THREADS

Latest posts