shower

[robin_374360071]

I have an Eldiss wisp 2 birth.. the toilet room has shower tray etc but no shower .. the sink has a mixer head and hot and cold taps , which are separate to the mixer head ... can I remove the head and replace it with a head with a flexible pipe on it to use as a shower... and is it easy and can I easliy get the bits I need to do it??

 

[PeaJay]

Hi robin, I've just joined this forum so am new to this.

However I had a Wisp 2 berth and the tap with the mixer head just pulls up. There is a flexible pipe attached to it already.

Peter

 

[robin_374360071]

Hi robin, I've just joined this forum so am new to this.

However I had a Wisp 2 berth and the tap with the mixer head just pulls up. There is a flexible pipe attached to it already.

Peter

Cheers thanks .. I will have to go and have a look .. I just thought the head was fixed to the sink.. it will be great if its already in shower mode .. I would just need a curtain and rail

 

[robin_374360071]

Hi robin, I've just joined this forum so am new to this.

However I had a Wisp 2 berth and the tap with the mixer head just pulls up. There is a flexible pipe attached to it already.

Peter

No the shower is not connected to any pipe .. but I have ordered some bits and hopefully they will work