Professionals do, "cowboys", don't.
You found one in that Halfords.
You found one in that Halfords.
- Jul 18, 2017
- 14,779
- 4,477
- 40,935
Lidl and aldi used to have them in regularly, no idea if they still do but but they were ok.
Main thing to remember is make sure you wind the tension off each use.
Main thing to remember is make sure you wind the tension off each use.
- Nov 16, 2015
- 11,529
- 3,754
- 40,935
Lidll, had one about 6 weeks ago, It could be worth asking the manager of the store if they have any left.
Then there is that well known online auction site, has many on offer,
eg LINK. Even comes with a 19mm socket, the preferred 6 cornered type.
How accurate, is anybody's guess but actually checking, using water and tape measure is easy if you have a strong enough bench mounted vice.
[An apprentice tool maker exercise back in the fifties, make and calibrate a bendy bar torque wrench]
However, I would wager that out of the box it will still be nearer "right" and consistent than your adviser in Halfords would be likely to be.
eg LINK. Even comes with a 19mm socket, the preferred 6 cornered type.
How accurate, is anybody's guess but actually checking, using water and tape measure is easy if you have a strong enough bench mounted vice.
[An apprentice tool maker exercise back in the fifties, make and calibrate a bendy bar torque wrench]
However, I would wager that out of the box it will still be nearer "right" and consistent than your adviser in Halfords would be likely to be.
Last edited:
Not good practice if accurate precision is required, slow steady continuous torque build up and to the single click on that occasion.
Personally I am a way bigger fan of the bending bar type for accurate work and there the progress approaching the desired torque is evident and there is no element of percussion involved. Academic here though with the quality and varying condition of the bolt threads involved, new plated, used so burnished, and later rusty!
Last edited:
Don’t do as a lot of people/garages do………bang them up over tight to start with, the put torque wrench on and push to the click, then give another 1/4 turn to make sure 🙄. Seen it loads of of times, saw a caravan engineer do it once, they used impact driver to do the wheel bolts up, then proceeded as above, funny thing is they were told to undo them, then do them up by hand and use the torque wrench correctly 😜
- Mar 14, 2005
- 18,484
- 3,767
- 50,935
If all you want a torque wrench to do is to check your wheel fixings and other light domestic jobs then I suggest the likes of an Aldi or Lidl tool will be well up to the job. I wouldn't recommend them for commercial activities as a suspect they would not be durable enough to cope.
I would avoid buying a cheap torque wrench from ebay or other dubious sources as not only will they be poorly made, there is a considerable chance the accuracy of the wrenches setting gauge may be well off , defeating one of the purposes of having a gauge.
Use reputable suppliers rather than unknown ones, which will also make returning faulty products somewhat easier also.
I would avoid buying a cheap torque wrench from ebay or other dubious sources as not only will they be poorly made, there is a considerable chance the accuracy of the wrenches setting gauge may be well off , defeating one of the purposes of having a gauge.
Use reputable suppliers rather than unknown ones, which will also make returning faulty products somewhat easier also.
- Feb 13, 2024
- 782
- 488
- 1,135
- Nov 11, 2009
- 23,007
- 7,771
- 50,935
Problem with Lidl and Aldi is you never know when any items are to be in stock. I’ve several DIY tools from them but just happened to buy them when they popped up on adverts or I spotted them when in store. Quality always good. Whereas Toolstation have Draper at around £44 and Amazon have the same with zero postage for Prime members.
- Mar 14, 2005
- 18,484
- 3,767
- 50,935
I agree about the general quality of Lidl and Aldi tools, there rarely nasty and cheap, but they are usually middle isle fodder when its gone its gone!
I would also trust items from Toolstation, screwfix and most of the DIY stores as long as their well known name, of long standing own brand products, but anything that pops up at super low price I would be suspicious about.
The next step up would be Snap on and the long established tool makers, but their products whilst usually made very well are outside the caravan hobbyists budgets, and would probably never be used enough to justify the expenditure.
Facebook
Twitter