• We’re currently investigating an issue related to the forum theme and styling that is impacting page layout and visual formatting. The problem has been identified, and we are actively working on a resolution. There is no impact to user data or functionality, this is strictly a front-end display issue. We’ll post an update once the fix has been deployed. Thanks for your patience while we get this sorted.

Truma ultraheat thermostat.

I am getting a fault where the heater overheats. The thermostat will not control. I switch the heater mains supply off and let heater cool down. After a while I try the heater and the stat works for a while and then stops and the heater overheats again.
2008 Swift Challenger.
 
This could be a wiring connection plug not fully locked into place, With the power off it may be worth checking anny connectors you can get at.

Otherwise it reads more like a circuit board fault, and propbaly best refered to a qualifeid techie.
 
It sounds like the upper temp limit switch has failed, and this is located on the outside of the control box which is behind the gas fire.
As it will entail the removal of the gas fire and the necessary replacement of flue seal and gas tightness checks you are best advised to get a mobile engineer to look at it.

Whilst he is changing the upper limit stat, get him to change the lower limit stat too as this will be the next to fail.
 
Damian, Do you have an electrical circuit for the heating including thermostat mounted remotely?
Truma_Dials.JPG
 

TRENDING THREADS

Latest posts

Back
Top