Tyre recommendations

[Fraseb01]

My local tyre dealer promotes Nexen tyres, at a cheaper price than buy cheap on the internet and fitting locally.

I avoid Chinese brands but accept that most big name brands are made in China now!

Another vote for Nexen tyres, use them on various motors we have and our caravan.

 

[Kevin M]

Hancock Vantra LT every time on the caravans for me

Kev

 

[toad a caravan]

 

[Sam Vimes]

Finally got around to searching for tyre but failed at the first fence.

The current tyres only show 174R14C so I don't know the profile. Tried searching and in 2017 someone had the same problem but no resolution.

How can I measure the profile?

 

[otherclive]

Finally got around to searching for tyre but failed at the first fence.

The current tyres only show 174R14C so I don't know the profile. Tried searching and in 2017 someone had the same problem but no resolution.

How can I measure the profile?

A “C” tyre has a standard profile of 80%. Although there are some with a less ratio eg 70. But it will say so after the width figure. Stick to 80% better on potholes.

 

[RogerL]

A “C” tyre has a standard profile of 80%.

Any tyre without the profile can safely assumed to be 80%, not just higher Load Index tyres.

 

[Sam Vimes]

Thanks for the replies.

Not that I doubt you but is there some specification that details this. I'd hate to order the wrong tyres and then have the hassle of returning them.

 

[RogerL]

Thanks for the replies.

Not that I doubt you but is there some specification that details this. I'd hate to order the wrong tyres and then have the hassle of returning them.

The best I can find you is Wikipedia https://en.wikipedia.org/wiki/Tire_code

There's reference to European Tyre and Rim Organisation (ETRTO) but their standards documentation is chargeable https://en.wikipedia.org/wiki/European_Tyre_and_Rim_Technical_Organisation

 

[toad a caravan]

This may help

 

[toad a caravan]

 

[Sam Vimes]

Thanks all - yes, I did discover the info and various descriptions of tyre dimensions.

What became apparent when I attempted to measure my tyres is that the dimensions for tyre height are in an unloaded condition - i.e not really fitted and on the vehicle which would compress the tyre.

So when I measured mine it came out at about 68%. This means it could be 70 or 80% although I'm thinking 80% is more reasonable.

There's also suggestion that the 'C' after the tyre details indicates 'Light Commercial Vehicles'

 

[otherclive]

Any tyre without the profile can safely assumed to be 80%, not just higher Load Index tyres.

Any tyre without the profile can safely assumed to be 80%, not just higher Load Index tyres.

that’s what I said in the latter part of my post viz “70”

 

[otherclive]

Thanks for the replies.

Not that I doubt you but is there some specification that details this. I'd hate to order the wrong tyres and then have the hassle of returning them.

Just be guided by those experienced members who have bee posting about his since year dot. If good enough for WVM you will be fine.

 

[otherclive]

Thanks all - yes, I did discover the info and various descriptions of tyre dimensions.

What became apparent when I attempted to measure my tyres is that the dimensions for tyre height are in an unloaded condition - i.e not really fitted and on the vehicle which would compress the tyre.

So when I measured mine it came out at about 68%. This means it could be 70 or 80% although I'm thinking 80% is more reasonable.

There's also suggestion that the 'C' after the tyre details indicates 'Light Commercial Vehicles'

If yours were 70 C it should say so after the width figure.

 

[RogerL]

that’s what I said in the latter part of my post viz “70”

I was clarifying the fact that it's not exclusive to "C" rated tyres - some older, lighter, caravans can/do use ordinary car tyres.

IMO it's much better to use Load Index and ignore the C

 

[toad a caravan]

I'm under the impression that the "C" relates to the height and width being identical, therefore a "80" signifies it's height is 80% of it's width,I have a 175x13C that is significantly taller when placed side by side upright with a 175 X 80 X 13 C

 

[RogerL]

I'm under the impression that the "C" relates to the height and width being identical, therefore a "80" signifies it's height is 80% of it's width,I have a 175x13C that is significantly taller when placed side by side upright with a 175 X 80 X 13 C

That's not true - initially all radial tyres were about 80% profile, usually 82%, compared to cross-ply tyres which were taller at 100% profile - a 175 13C tyre is the same as a 175/80 R13C